|
|
|
|
UNILIT
46 (DOMUS AS)
BONDING
LAYER FOR GLUING CERAMICS, TERRACOTTA AND NATURAL STONES DESCRIPTIONBio-ecological
bonding layer for natural stones, terracotta and ceramic tiles, based on natural
hydraulic lime, and selected aggregates. The
product is identified by a high compressive strength, a high impact strength
adapted to horizontal and vertical surfaces.
TECHNICAL
PROPERTIES
Grain
size
0-0.5 mm Proportion
water/Unilit 46
0.25 l/kg Average
consumption
4-5 kg/m² Vapour
diffusion resistance
µ = 11 Compressive
strength
5.5 N/mm² Elasticity
4800 N/mm² Tensile
strength
>6 kg/cm² Fire
classification
non-flammable
(class M0) Storage
6 months Mixing
time
~5 minutes PREPARATION
UNILIT
46 only has to be mixed with clean water, in a ratio of 22-24%.
Them mixing can either be done manually or mechanically.
Mixing time : approximately 5 minutes. A
homogeneous layer of UNILIT 46 is spread out with a drag, on horizontal and
vertical surfaces. Do
not apply when the surface is water-saturated or instable.
The substrate should be frost free for 48 to 72 hours after the
application of the mortar. If the
substrate is too dry are strongly absorbent, it has to be dampened first.
PACKING
30
kg bags REMARKS
In
case of doubt regarding the substrate, consult our technical service department. The material must be stored dry and frost free above ground.
The maximum storage time is 6 months.
Our advice and information is given in good faith and depending on the
latest developments of our products. We
guarantee the constant quality of our products, but do not accept any liability
concerning the application.
|
|
Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium) tel: +32 (0)3 880.73.73 fax: +32 (0)3 880.73.70
made by stevensschool
|