|
|
|
|
UNILIT 47 (DOMUS Pan)
BIO-ECOLOGICAL
BONDING LAYER DESCRIPTION
UNILIT
47 is an adhesive material, developed for bio-ecological engineering.
UNILIT 47 is a blend of natural hydraulic lime, an selected aggregates
with a maximal grain size of 0.5 mm. The
product is characterized by a high vapour diffusion capacity, elasticity and
bonding strength. APPLICATION
UNILIT
47 is developed to (re)glue thermal insulation tiles and panels.
The product can also be used as bonding layer on top of the tiles, on
which a compatible finish can be applied. TECHNICAL
PROPERTIES
Grain
size
0 to 0.5 mm Proportion
water/Unilit 47
0.2 l/kg Density
of the mortar
1550 kg/m³ Tensile
strength
> resistance of standard tiles Elasticity
4500 N/mm² Vapour
diffusion resistance
µ = 12 pH > 10.5 Fire
classification
non-flammable
(class M0) Storage
6 months PREPARATION
The
product can either be mixed manually or mechanically at low rotation speed.
Clean water has to be added until a smooth mixture is obtained. Gluing : apply an adequate amount of UNILIT 47 on the
borders of the tiles, at 4 or 5 spots. The
total consumption of the mortar should be 4 to 5 kg/m².
Bonding layer : spread out UNILIT 47 on the fixed and dry panels.
Eventually a fibreglass armament can be inserted, on which a new layer of
UNILIT 47 can be applied, to obtain a homogeneous layer.
PACKING
25
kg bags. REMARKS
In
case of doubt regarding the substrate, consult our technical service department. The material must be stored dry and frost free above ground.
The maximum storage time is 6 months.
Our advice and information is given in good faith and depending on the
latest developments of our products. We
guarantee the constant quality of our products, but do not accept any liability
concerning the application. |
|
Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium) tel: +32 (0)3 880.73.73 fax: +32 (0)3 880.73.70
made by stevensschool
|