Anti-graffiti

Start ^ SITEMAP

 

KEIM ANTI-GRAFFITI WAX COATING SYSTEM    

Description          

Keim Anti-Graffiti  wax coating is a semi-permanent anti-graffiti coating, a water-based and concentrated solution. 

 

Application

Keim Anti-Graffiti wax coating can be applied on porous, non-impregnated substrates like : concrete, bricks, plasterwork, cellular stones, mineral isolation, natural stones and mineral paints. 

  

Characteristics

*     Universally applicable transparent product, mat

*     odourless

*     solvent-free

*     no influence on the original colour of the substrate

*     no yellowing

*     washable with Keim Anti-Graffiti Cleaner wax coating

 

Technical properties

Colour                                                                       white, after drying colourless (transparent)

Density                                                                      1.0 g/cc

Composition                                                               micro wax, polymeric wax

Application temperature                                              between 5 - 30°C

Alkalinity                                                                    pH 8,5- 8,7

  

Preparation of the substrate

The substrate has to be clean and dust-free, eventually use high-pressure cleaning. 

  

Practice

Dilute Keim Anti-Graffiti Wax coating 1:1 with water.  The maximum tub-life is ca. 12 hours. 

Apply 2 layers of Keim Anti-Graffiti Wax coating with a low-pressure paint sprayer (The wait between the layers is  ca. 4 hours).  It is also possible to use a brush, a paint roller or airless equipment.  

After ca. 2 days the graffiti can be removed with Keim Graffiti-Cleaner Wax coating.  The product has to react for maximal 30 minutes (persistent graffiti), else 15 à 20 minutes (normal use), and afterwards rinse the substrate with clean water, eventually with high-pressure water spray.  The high-pressure cleaning has to be performed at temperatures between 40 and60°C and pressures of 60-90 bar. 

After drying, apply Keim Anti-Graffiti Wax coating for a second time.

Do not apply at a relative humidity of > 90%.

New masonry, renders and plasters, mineral paints etc. has to be 6-8 weeks in age.

  

Colour

Transparent product.

 

Packing

Keim Anti-Graffiti Wax coating                         25l -10l-5l

Consumption

Keim Anti-Graffiti Wax coating             0,250 - 0,300 l/m², 2 layers, 1:1 mixed with water

 

Keim Anti-Graffiti Wax coating             0,375 - 0,450 l/m², 3 layers                

 

The consumption of the Keim Anti-Graffiti Wax coating system is strongly dependent on the porosity and suction of the substrate.

  

Storage

24 months in closed tubs.

  

Cleaning of tools

With water, immediately after painting.

 

 Remarks

In case of doubt regarding the substrate, consult our technical service department.  The material must be stored dry and frost free above ground.  Our advice and information is given in good faith and depending on the latest developments of our products. We guarantee the constant quality of our products, but do not accept any liability concerning the application.

  

 

Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium)

tel: +32 (0)3 880.73.73   fax: +32 (0)3 880.73.70

Info@arteconstructo.be

 

made by stevensschool