|
|
|
|
PLASTELUX
Sealer for Venetian stucco DESCRIPTION
Plastelux
is made from special, high-quality resin, mineral products, fillers, oxide
pigments and various additives. The
decorative chip technique of Plastelux
gives walls and ceilings a particularly aesthetic appearance, with a refined and
elegant ambience. The surface is
smooth and glossy, graceful in form, rich in colour effects, structures and
light-shade nuances. The
use of Stucco Lucido (masterpieces) originated in ancient times but reached its
peak in the Renaissance and Baroque periods, particularly in the Venice region.
Plastelux is the splendid
result of the rich experience of the stucco masters of that period. The
particular properties of the stucco materials have been further refined by the
use of modern production techniques. APPLICATIONS
All types of interior, even quite high-moisture rooms, as the product is water-resistant and washable. TECHNICAL
PROPERTIES
Specific
density
approx. 1.650 kg/litre Dilution
ready-mixed, with oil of turpentine COVERAGE
0.3 to
1.0 kg/m2, depending on the base. COLOUR
Supplied
ready-mixed in white. Can be
coloured using Coridecor oxide
colour concentrates by mixing in an agitator.
There are also 8 ready-mixed shades available.
Special shades can be produced in the factory from colour samples. USE
Plastelux can
be used without any problem on almost any base, after the appropriate
pre-treatment : on all types of new or painted plasterwork, concrete,
plasterboard and wood bases and with a special primer on plastic (coatings) and
metal. Pre-treatment
is not necessary if the base is plastered with plain plaster.
But
if the plaster contains gypsum or has already been painted, a base coat of Corifondo
should be applied. If the base is
not a stable background or comprises several coats of paint, lime paint or
washable paint, it should be made smooth. Residues
should be removed and a base coat of Corifondo must be applied.
Wood bases must be treated with Corifondo
wood impregnator. 2 to 3 coats of Plastelux
should be applied, depending on the condition of the base, using a special
flexible trowel made of spring band steel, until the surface is completely
smooth and homogenous. The flexible
trowel or a palette knife is then used to produce the required surface
structure. To achieve the
characteristic and typical effect of the Venetian plaster, Stucco Lucido, the
product should be applied until a uniform and perfect gloss finish is achieved.
The same tool can be used for polishing the surface as for applying the
product. Another option is to use a
cotton cloth. If Plastelux is
used as a final coat, the base coat can be Venestuk. If,
for the last application, Plastelux
is applied on top of Venestuk,
there is no need to apply wax. Plastelux
is washable and dirt-repellent and can be treated in the same way as a lacquered
surface. A
waxed stucco surface can only be repaired to a limited extent.
Plastelux can be easily
patched and reapplied without leaving streaks.
PACKAGING
5 kg and
25 kg buckets. NOTESBecause of the composition of the product (lime), avoid contact with the skin and particularly with the eyes. In the event of contact rinse eyes immediately with plenty of water and seek medical advice. Keep out of reach of children. Plastelux should be stored in a cool, dry place, at a minimum temperature of 3°C. The product will then keep for an unlimited period in its original packaging and will retain its properties. Once opened, the packaging should be hermetically sealed again after use. |
|
Arte Constructo bvba - Molenberglei 18 - B- 2627 Schelle (Belgium) tel: +32 (0)3 880.73.73 fax: +32 (0)3 880.73.70
made by stevensschool
|